EarbudsArena is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission.

How to Fix Any QCY TWS Earbuds That Can’t Pair: Easy Way!

So you’ve just bought a new pair of QCY TWS Earbuds, excited to dive into your favorite tunes wirelessly, but you hit a snag – they just won’t pair. It’s a common frustration that can dampen the excitement of your new purchase.

But there’s no need to worry or panic. You’ve come to the right place. In this guide, I’ll walk you through a simple, 100% working solution to get your earbuds paired and functioning as they should.

Whether it’s a glitch or a minor hiccup in the pairing process, our easy-to-follow steps will ensure you can enjoy your music without any further delay.

Let’s get started and solve this pairing puzzle together!

Also See: How To Fix Any TWS Pairing Problems

Understanding the Pairing Problem:

  • Recognizing a Pairing Issue: One clear sign of a pairing problem is when both earbuds show up as separate devices for pairing on your Bluetooth device.
  • Ideal Pairing Sequence: Typically, you only need to pair the right earbud. The left earbud should automatically connect to the right, providing a smooth audio experience.
  • Indicator Lights: Incorrect blinking patterns on the earbuds often signal an issue. The right earbud’s light serves as the primary indicator, with specific colors representing different statuses during the pairing process.
How to Fix Any QCY TWS Earbuds That Can't Pair

How to Fix Any QCY TWS Earbuds That Can’t Pair:Step-by-Step Solution

The solution might already be outlined in your manual, but let’s break it down into a simple step-by-step process for clarity:

1. Initiate the Reset

  • Begin by placing both earbuds back into their charging case. This action turns them off and prepares them for the reset process.
  • After a short moment, remove the earbuds from the case to start the repair process. Ensure both earbuds are off before proceeding to the next step.

2. Perform the Reset

  • Press and hold the buttons on both earbuds simultaneously. After a few seconds, you’ll notice a red light, indicating they’re powered off but still in reset mode.
  • Continue holding the buttons for about 20 seconds. During this period, the earbuds will likely flash or change colors, signaling that the reset process is in progress. It’s crucial to hold the buttons down for the entire duration to ensure a successful reset.

3. Reactivate and Pair

  • Once the reset is complete, release the buttons. You’ll see a specific blinking pattern that indicates the earbuds are ready to be turned back on and paired with each other.
  • Turn on the earbuds and look for a white blinking light, which means they are searching for each other. A successful pairing is usually indicated by a white and red blinking light on the right earbud.

4. Final Steps

  • Head over to the Bluetooth settings on your device. You should now see only one earbud (the right one) listed for pairing. Connect to it, and both earbuds should work in sync, delivering your favorite tunes directly to your ears.

Also See: How to Set Up Realme Buds Air 5 Pro

Conclusion: Enjoy Your Music Again!

Congratulations! You’ve successfully repaired your QCY TWS earbuds. This quick fix should resolve any pairing issues, allowing you to dive back into your music, podcasts, or whatever audio you enjoy. Remember, technology can be quirky, but there’s almost always a simple solution to get things working again.

Should you have any questions, or if the method outlined doesn’t resolve your issue, please don’t hesitate to share your concerns with us in the comments section below. We’re here to collaborate and find a solution together.

Leave a Comment